Turbine oil pollution control including reconcile the production
control and operation control of two aspects. In the process of
turbine oil production and operation of turbines, generally we use Turbine Oil Purifier to remove solid impurities, moisture and gas.
When the Turbine Oil Purifier is working, the contaminated oil enters the heater through the
inlet through the inlet of the outside air pressure, the heated oil
enters the primary filter, the large particle impurities are
filtered, and then the oil enters the water separator, vacuum
separation device, through a special divergence device. The
diffuser creates a large surface area per unit volume of oil,
exposing the contaminated oil to an atmosphere of relatively low
relative humidity, thereby removing water, air and gas from the
oil. Evaporation of water vapor, the gas formed by the mixed gas
through the tank and cooler condensed into a liquid, together into
the water reservoir, the remaining gas was vacuum pumping out.
Remove the oil from the oil pump into the fine filter into the fine
filter impurities, that is, purification of oil, to complete a
purification process, according to the amount of water, the need to
cycle several times to completely remove the water.
1. Turbine Oil Purifier in the factory have been adjusted before
the test, transported to the use of the site to check whether the
parts are intact.
2. Oil Filtration Machine is installed stable, the oil port
connected to the lower part of the fuel tank, the oil port
connected to the upper part of the tank.
3. Oil Purifier Machine connected to the power and ground. The power distribution cabinet
on the machine and the pump, vacuum pump, heater wiring should be
checked to ensure that the connection is firm, reliable insulation.
4. the pump motor test start, observe whether the clockwise
rotation (from the motor side face). Otherwise the power exchange
5. On-line purification of hydraulic turbine oil, steam turbine oil
and other mechanical oil filtration, the need to add the same brand
of oil to ensure normal oil tank.
Company: Acore Filtration Co.,Ltd
Tel: +86 23 8132 4618
Whatsapp & Mobile: +86 13206063693